Ryder Handmade Abaca Rug

Size Conversion Chart

Dining Room Rug Placement Guide

Use this guide alongside the size chart above to choose the right rug for your dining space and get the placement right the first time.

Step 1 — Measure Your Table

Measure the full length and width (or diameter, for round tables) of your dining table. Write these down — you'll add chair clearance to both dimensions in the next step.

Step 2 — Add Chair Pull-Out Clearance

When a chair is pulled out for seating, it typically extends 18–24 inches (46–61 cm) beyond the table edge. To keep all four chair legs on the rug — even when pushed back — add 24 inches (61 cm) to each side of your table measurement:

Tip: If your space is tight, 18" per side is the absolute minimum — but 24" is strongly recommended.

Step 3 — Rectangular vs. Round Tables

Rectangular tables pair best with rectangular rugs. Match the rug proportions to the table: a long, narrow table suits a 8×10 or 9×12 rug; a shorter table suits a 6×9 or 8×10.

Round tables pair naturally with round rugs. Apply the same 24" clearance rule to the diameter: a 48" (4 ft) round table needs at least a 96" (8 ft) round rug. A square rug can also work — size it as you would a rectangular table of equivalent dimensions.

Step 4 — Front-Leg vs. All-Leg Placement

There are two accepted approaches for dining chairs on a rug. All-leg placement (Option A) is the standard for dining rooms:

Quick Reference

• 24" per side = all chair legs on the rug (recommended)
• 18" per side = minimum; front legs on, rear legs may slide off
• Round table? Match with a round rug at least 24" wider in diameter than the table
• Always measure your room first — leave at least 18–24" of bare floor between rug edge and wall.